Bottle Packaging
Boxes that keep bottles organised in transit
Die-cut SPC boxes with internal slotted dividers and a bottom pad, developed to keep bottles separated, upright and stable through handling and transport.
The packaging challenge
Bottles move in quantity. They need to stay separated, upright and protected through stacking and repeated handling — in environments where paper-based packaging struggles.
Cell separation
Dividers keep each bottle in its own cell, preventing contact and damage.
Upright stability
Slotted dividers and a bottom pad keep bottles vertical through transport.
Moisture resistance
The composite sheet holds its structure in humid and chilled environments.
Stacking
The box structure is developed to carry stacked loads.
Current reference configuration
A product reference developed around a 1-litre bottle set. Custom sizes and cell patterns are developed per order.
- 01
Inner size
48.5 × 38.8 × 25 cm.
- 02
Cells
4 × 5 = 20 cells.
- 03
Dividers
3 long + 4 short slotted dividers.
- 04
Pad
1 bottom pad sheet.
What we need to develop your bottle box
The reference above is one configuration. Tell us your bottle and box requirements.
- Bottle diameter, height and weight
- Bottles per box and cell pattern
- Box dimensions or pallet pattern
- Environment: chilled, humid or ambient
Mineral-rich composite
The same SPC hollow board used across the product range, converted with slotted dividers and pads into a bottle packaging system.
Frequently asked questions
- Is 48.5 × 38.8 × 25 cm the only size you make?
- No. That is a current product reference developed for 1-litre bottles. Sizes, cell patterns and dividers are customised per order.
Tell us your bottle
Send bottle dimensions and quantities. We will recommend a cell pattern and box structure.